Always buying scrap metal at best prices! Melbourne-wide fast free pickup & bins

Servicing all of

220 Princes Hwy, Dandenong VIC 3175

Servicing all of

220 Princes Hwy, Dandenong VIC 3175

Best price guaranteed

Sell metal scraps

Fully licensed

Australian owned

Eco-friendly

Metal recycling services

Scrap Metal Recycling for Electricians and Electrical Contractors

Different electrical jobs produce different types and quantities of scrap. A residential electrician might collect copper wire and small metal fittings from several service calls, while a commercial contractor could generate larger quantities during a building upgrade.

Melbo Scrap Metal works with:

Whether you generate a small amount of scrap occasionally or have materials from several active sites, contact us with details of the metals and approximate quantity. We can discuss whether yard drop-off or collection is the more practical option.

Types of Electrical Scrap Metal We Buy

Electrical work can produce several types of recyclable metal. Keeping different materials separate where practical makes identification and assessment easier.

Copper Wire and Cable Scrap

Copper is widely used in electrical wiring because of its conductivity. It is also one of the common materials recovered during rewiring, electrical replacement and installation work.

Melbo Scrap Metal buys suitable copper scrap, including:

  • Bare and clean copper wire
  • Insulated copper wire
  • Copper electrical cable
  • Copper pipe and offcuts
  • Copper conductors
  • Cable removed during rewiring
  • Suitable copper components from electrical projects

The value of copper depends on its grade and condition. Clean copper, insulated cable and mixed copper materials are assessed differently. Insulation, thickness and the amount of recoverable copper can all influence the final valuation.

If you regularly collect copper cable, keep different grades separate where possible. This helps avoid mixing clean copper with insulated or lower-grade materials.

Find out more about our copper scrap metal recycling service.

PVC Cables and Wires

PVC-insulated cables are another common source of scrap for electricians. They are often removed during rewiring, building renovations, electrical upgrades and replacement of older installations.

Melbo Scrap Metal buys suitable PVC cables and wires, including:

  • Household electrical cables
  • Copper, lead and aluminium cables
  • PVC bright cables
  • Bus looms
  • Tinned cables
  • Low-grade and high-grade cables
  • Cat 5 cables
  • Coaxial cables
  • Wires recovered from electrical appliances
  • Heavy-duty twin and earth cable

Cable composition, insulation, condition and recoverable metal content affect its grade. Two bundles that look similar may not have the same value, so materials need to be assessed individually.

Where practical, separate different cable types before bringing them in. Do not burn insulation to recover copper or other metals. Burning cable can release harmful fumes and creates unnecessary safety and environmental risks.

For further details, visit our PVC cables and wires scrap recycling page.

Aluminium Cable and Electrical Scrap

Aluminium is used in certain electrical conductors and cable systems. It can also be found in fittings, housings and other components removed during electrical work.

Suitable aluminium scrap may include:

  • Aluminium cable and conductors
  • Aluminium offcuts
  • Aluminium fittings
  • Metal components from electrical installations
  • Other identifiable aluminium scrap

The condition and composition of the material affect its assessment. Insulated aluminium cable and clean aluminium should be kept separate where possible, rather than combined into one mixed load.

Electric Motors

Electric motors are used in commercial and industrial machinery such as pumps, fans, and blowers. An electrician will come across redundant motors when replacing equipment, maintaining equipment, or upgrading wiring.

Melbo Scrap Metal collects appropriate electric motors of all shapes and sizes. The state of the motor and the type of motor will influence the valuation of the electric motor, so we will need to know about it before arranging for collection.

Do not assume that just because an item has an electric motor it can be accepted. Household appliances and white goods are not accepted by Melbo Scrap Metal.

Brass, Stainless Steel and Other Metals

When replacing a water heating unit or other plumbing item, it may result in an unwieldy object to either store or transport. Nonetheless, the complete unit might be made up of a combination of copper, steel, plastic, and other substances, such as insulation and electrical parts. The acceptance of the object cannot be based on the presumption that the unit is composed of either of these metals.

If you have a hot water system, storage cylinder, radiator, heater, or some other kind of an object, please get in touch with Melbo Scrap Metal and send us a picture of it together with information on its condition. We will have to find out whether it is accepted before you make arrangements for transporting or collecting the object.

Please do not assume that draining, disconnecting, dismantling, and removing of fittings are parts of the process of scrap collection. Where appropriate, gas, electrical, and plumbing connections should be turned off by the relevant professional, and all of the water, refrigerant, fuel or other substance should be safely removed.

Aluminium, Cable and Other Metals

Electrical installations can also produce smaller quantities of metal used in fittings, connectors, supports and equipment components.

Depending on the material, suitable scrap may include:

  • Brass fittings and components
  • Stainless steel parts
  • Steel brackets and supports
  • Aluminium housings and offcuts
  • Other identifiable ferrous and non-ferrous metals

These materials may come from electrical installations, maintenance work and commercial fit-outs. Keep different metals separate where practical. If you are unsure whether a particular component is accepted, contact us with a description or photograph before visiting.

When Do Electricians Generate Scrap Metal?

Scrap metal can accumulate at different stages of electrical work. Setting aside suitable materials as a project progresses makes it easier to manage them later.

Rewiring and Electrical Replacement

Most rewiring jobs entail removing existing cable and putting in new wiring. The electrician would end up with copper wires, cable and fittings. It is important that you separate the cables that you remove from the rewiring project in order to have different identifiable cables and not allow them to get mixed up with other building materials.

New Installations and Fit-Outs

New electrical installations can produce cable offcuts, wiring and metal components. Individual offcuts may be small, but they can add up across larger residential developments, commercial fit-outs and construction projects. A dedicated container for suitable scrap can help keep these materials separate from packaging and general rubbish. Once the job is complete, the collected metal can be assessed for recycling.

Switchboard and Commercial Electrical Upgrades

Some of the commercial electrical jobs include system upgrades, infrastructural changes or changes to the distribution equipment. The above-listed tasks can generate cables, metallic frameworks and other parts. It is worth mentioning that not everything you get out of the electrical job can be considered common scrap material. The whole switchboards, electrical cabinets and the combined units consist of multiple materials/components, which need to be disposed of separately.

Data and Communications Cabling

Data and communications contractors may remove older cabling during network upgrades and infrastructure replacement. Cat 5, coaxial and other suitable cables can form part of the scrap generated by these projects. Keep different cable types separate where possible and exclude plastic conduits, packaging and unrelated waste from the scrap load.

Industrial Electrical Maintenance

Factories and industrial facilities regularly maintain or replace electrical equipment. This work can generate cable, electric motors and other metal components. Businesses with ongoing maintenance projects can discuss suitable collection or bin arrangements with Melbo Scrap Metal. The right option depends on the materials, quantity, location and collection requirements.

Electricians Scrap Metal Collection in Melbourne

Transporting scrap after every job is not always practical, particularly for contractors working across several sites. Melbo Scrap Metal can discuss collection arrangements for qualifying loads across Melbourne.

Collection suitability depends on:

  • The type of metal being collected
  • The approximate weight and volume
  • The collection address
  • Vehicle access and loading conditions
  • Scheduling and availability

Free pickup may be available for qualifying loads, depending on the quantity and location. A minimum load requirement may apply, so contact us before making arrangements.

For smaller quantities, bringing the scrap directly to our Dandenong yard may be more convenient.

Scrap Metal Bins for Electrical Contractors

Electricians who have scrap on a regular basis would do well to have a specific place where they could store their scraps. An appropriate bin could assist in organizing scraps in between jobs.

Melbo Scrap Metal has bins of different sizes, which range from about 2m³ to 30m³, that could be used for proper arrangement.

Bins may be worth discussing if you:

  • Operate an electrical contracting business with several active projects
  • Complete regular commercial maintenance
  • Manage ongoing industrial electrical work
  • Generate cable and metal offcuts at a workshop
  • Need a central collection point for scrap from multiple jobs

Bins should only be used for the agreed scrap materials. General rubbish, timber, plastic, chemicals, liquids and hazardous waste must not be mixed with scrap metal. Contact our team to confirm the suitable materials and arrangements before placing a bin at your premises.

How We Assess and Pay for Electrical Scrap Metal

Electrical scrap does not have one fixed value. Copper cable, insulated wire, aluminium and other metals have different grades and market prices. The value of your load depends on its composition, condition and weight.

Our assessment considers:

Metal type

Copper, aluminium, brass, stainless steel and other metals have different grades and values.

Cable composition

The conductor, insulation and recoverable metal content influence cable grading.

Condition

Clean, separated materials may be assessed differently from mixed or contaminated scrap.

Weight

The quantity of material contributes to the overall valuation.

Market conditions

Scrap metal prices can change, so rates may vary over time.

Separating different materials before weighing can make assessment clearer. When requesting a quote, provide accurate details about the type and approximate quantity of scrap you have.

Payment for scrap metal transactions is made by bank transfer. Photo identification is required as part of the transaction process. Our team can explain what you need when you contact us or visit the yard.

Preparing Electrical Scrap for Recycling

A little preparation can make collection and drop-off easier. It also helps prevent unsuitable materials from being mixed with recyclable metal. Before arranging collection or bringing scrap to the yard:

Separate different metals:

 Keep copper, aluminium, brass, stainless steel and other identifiable metals apart where practical.

Sort cable by type

Separate insulated cable from bare copper and distinguish different cable grades where possible.

Remove general waste

Do not mix packaging, timber, plastic or unrelated rubbish with scrap metal.

Provide details about larger items

Contact us before transporting motors, bulky components or electrical assemblies.

Check collection access

For larger loads, consider whether the site has suitable vehicle access and room for loading.

Ask about unusual materials

Equipment containing fluids, batteries or potentially hazardous components may require specific handling.
Electrical safety is essential. Wiring and equipment must be safely disconnected and isolated by a suitably qualified person before removal. Never cut into live wiring, dismantle connected equipment or burn cable to recover metal.

What We Do Not Accept

Melbo Scrap Metal focuses on scrap metal recycling rather than general waste removal. Household appliances and whitegoods are not accepted, even if they contain metal or electric motors.

Do not include the following in ordinary scrap loads:

  • General household or commercial rubbish
  • Timber and building waste
  • Plastic and packaging
  • Chemicals and hazardous waste
  • Liquids and materials contaminated with oil or other substances
  • Unapproved mixed waste

Complete switchboards, electrical panels, machinery and equipment containing fluids or potentially hazardous components should be discussed with us before transport. Acceptance depends on the specific item and its condition.

If you have a mixed load from an electrical project, explain what it contains before arranging the collection. This can help avoid unnecessary transport.

Areas We Service Across Melbourne

Melbo Scrap Metal is situated at 220 Princes Highway, Dandenong VIC 3175 and serves clients all around Melbourne region and the surrounds. The reach of our collection service can extend up to about 70 km from location to location and load size.

We deal with electricians and contractors who would like to recycle the appropriate amount of scrap metal from their residential, commercial or industrial job sites. Contact us to see whether we can serve your location and how much scrap metal you have.

You can also deliver the appropriate scrap to our Dandenong yard.

Why Choose Melbo Scrap Metal?

An easy way to handle scrap metal from installations, repair work, and maintenance needs to be available to electricians. It is important to know which scrap metals are accepted, how collection is done, and how the worth of the material is determined.

Melbo Scrap Metal has been in business in the Melbourne scrap metal industry for more than 10 years and purchases different kinds of ferrous and non-ferrous metals. Our business deals with customers who have metal of the right kind that they can sell to us.

You can talk to us about arranging a collection of scrap metal that qualifies or bring scrap metal directly to our yard in Dandenong. Scrap metal is evaluated based on the type of metal, its grade, its condition and its weight; and payment is done through bank transfer.

Whatever type of scrap metal you have, like copper wiring, insulated cable or motors, you can talk to us about the materials you have.

FAQs

Frequently Asked Questions

What types of scrap metal can electricians sell to Melbo Scrap Metal?

Electricians can enquire about selling suitable copper wire, insulated copper cable, PVC cables, aluminium cable, brass, stainless steel, steel, electric motors and other identifiable metal scrap. Contact us about unusual components or mixed electrical equipment before bringing them in.

Yes. We buy suitable insulated copper wire and cable. The insulation, cable composition, copper content and condition affect its grade and value. Keep different cable types separate where practical.

Suitable cables removed during rewiring can be brought in for assessment. This may include copper wiring and different types of insulated cable. Ensure all wiring has been safely disconnected and isolated before removal.

We buy suitable aluminium scrap, including aluminium cable and conductors. The material's condition and composition affect its assessment. Contact us if you are unsure whether your cable is suitable.

Yes, we buy suitable electric motors of different types and sizes. If a motor is attached to machinery or other equipment, contact us before arranging transport. Complete household appliances and whitegoods are not accepted.

Collection may be available for qualifying loads, depending on the material, quantity, location, access and scheduling. A minimum load requirement may apply. Call 0405 622 777 to discuss your collection requirements.

Bins of approximately 2m³ to 30m³ are available for suitable arrangements. The appropriate size depends on your scrap volume, location and collection needs. Contact our team to discuss options for your business.

Pricing depends on the metal type, grade, condition and weight. Clean copper and insulated cable, for example, are assessed differently because their recoverable metal content varies. Market prices can also change, so contact us for an assessment.

No. Payment for scrap metal transactions is made by bank transfer. Photo identification is required as part of the transaction process.

Yes. Bring suitable scrap metal to 220 Princes Highway, Dandenong VIC 3175, Monday to Saturday, between 7 am and 5 pm. Contact us before visiting with bulky equipment, motors or unusual electrical components.

Do not assume complete switchboards, electrical panels or mixed electrical assemblies can be accepted as ordinary scrap. Contact us with details before bringing these items to the yard.

Sell Your Electrical Scrap Metal in Melbourne

Have copper wire, insulated cable, aluminium conductors, electric motors or other suitable metal scrap from electrical work? Contact Melbo Scrap Metal to discuss an assessment, yard drop-off or collection for qualifying loads.

Call 0405 622 777 to ask about your materials and current pricing.